RobStride RS01 CAN Joint Actuator
- CAN joint integration requiring 36 V nominal supply, a 7.75:1 planetary reducer and 1 magnetic encoder.
- Mechanism development with a defined load, speed, duty cycle and thermal mounting arrangement.
HEAD-TO-HEAD · ACTUATORS & JOINT MODULES
RobStride RS01 CAN Joint Actuator vs RobStride RS00 CAN Joint Actuator
RobStride RS01 CAN Joint Actuator (RobStride) and RobStride RS00 CAN Joint Actuator (RobStride) are both listed in actuators & joint modules. The table shows only figures stated in each manufacturer's document; where one document is silent, request the value with your quotation.
Key differences
- Supply voltage: RS00 lists 48 V, RS01 lists 36 V (1.3× the documented value).
- Peak torque: RS01 lists 17 N·m, RS00 lists 14 N·m (1.2× the documented value).
- Gear ratio: RS01 — 7.75:1; RS00 — 10:1.
Specifications side by side
| Specification | RobStride RS01 CAN Joint Actuator | RobStride RS00 CAN Joint Actuator |
|---|---|---|
| Peak torque (N·m) | 17 | 14 |
| Rated torque (N·m) | 7 N·m in the October series table; 6 N·m in model manuals, under their respective thermal conditions | 5 |
| Gear ratio | 7.75:1 | 10:1 |
| Gear type | Planetary; machined steel gearing | Planetary; machined steel gearing |
| Weight (kg) | October series table: 395 ±3 g. Chinese and English manuals and the manufacturer webpage: 380 ±3 g. Specify the delivered revision and installed mass in the quotation. | Request specification |
| Supply voltage (V) | 36 | 48 |
| Source review | Source review: 2026-10 | Source review: 2026-10 |
Where each model fits
RobStride RS00 CAN Joint Actuator
- CAN joint integration requiring 48 V nominal supply, a 10:1 planetary reducer and 2 magnetic encoders.
- Mechanism development with a defined load, speed, duty cycle and thermal mounting arrangement.
Planning a robotics purchase? Share the quantity, configuration and destination so we can check fit, availability and quote requirements.
Request a quote— The Sourcebotics sourcing desk