Electric Robot Grippers from China

Start with the largest and smallest part dimensions at the intended grasp faces. Include approach clearance and finger-tool geometry. A listed stroke is travel; it does not by itself establish the opening with your fitted fingers.

Keep the manufacturer's force definition with the value: per jaw or total, finger length and contact location. Give the supplier the part mass, surface, acceleration and grasp direction so the proposed setting addresses the actual move.

Itemize the gripper, custom fingers or pads, wrist adapter, power cable, communication cable and any external controller. Name the robot controller and required protocol, and include the matching command example or integration file.

Use representative parts and the planned finger tooling. Record grasp success, dropped or marked parts, cycle time and the recovery sequence. Include the target cycle rate and daily duty in the inquiry.