UnitreeDex5-1
- Degrees of freedom
- 20 total; 16 active
- Hand mass
- 1100 g
- Fingertip force
- 10 N
Price on request
Unitree Robotics(宇树科技股份有限公司)
Explore products and company information for your sourcing shortlist.
Hangzhou, Zhejiang · est. 2016 · Publicly listed (SSE STAR: 688836)
About
Unitree develops quadruped and humanoid robots, manipulators and core components including actuators and LiDAR. Its public resources support research and application development across these product families. The company listed on the Shanghai Stock Exchange STAR Market in August 2026 under code 688836.
Unitree develops humanoid and legged robots, manipulators, dexterous hands and robot components. Its corporate profile gives a 2016 establishment and a Hangzhou headquarters; its official product site links the model families and developer resources.
The Shanghai Stock Exchange announcement, published on 18 August 2026, states that Unitree shares began STAR Market trading on 19 August 2026 under code 688836. This corporate event does not establish product availability or warranty coverage.
For a procurement request, identify the exact robot or component, edition, accessories and destination. Ask for the corresponding manual, SDK access, software license, electrical interfaces, spare parts and written warranty scope. Compare performance only within the stated configuration and test conditions.
Sourcebotics is an independent sourcing service. Supplier names and official links identify the manufacturer; they do not imply that Sourcebotics is an authorized distributor. Confirm the seller, contracting entity, warranty coverage and any claimed authorization with the manufacturer for the specific transaction.
Explore products
23 models in the Sourcebotics catalog.
Hands & Grippers
Actuators & Joint Modules
UnitreeGO-M8010-6
- Peak Torque
- 23.7 N.m
- Torque Constant
- 0.63895 Nm/A
- Max Speed
- 30 rad/s @24 VDC
Price on request
LiDAR & Perception
UnitreeL2
- Range
- 30 m at 90% reflectivity; 15 m at 10%
- Field of view
- 360° × 90° normal; 360° × 96° in negative-angle mode, with shorter range in the extra 6°
- Effective point rate
- 64,000 points/s; distinct from 128,000 raw samples/s
<$1k
Humanoid Robots
UnitreeG1
- Standing dimensions
- 1320 × 450 × 200 mm
- Weight
- About 35 kg including battery
- Body DoF
- 23
$13,500–$16,000
UnitreeR1
- Standing dimensions
- 1230 × 357 × 190 mm
- Weight including battery
- About 29 kg
- Total motorized joints
- 26
$5,900–$7,000
UnitreeH1-2
- Height / dimensions
- About 178 cm; table: (1503+285) × 510 × 287 mm
- Weight
- About 70 kg; battery inclusion unspecified
- Body DoF
- 27; 6 per leg, 7 per arm, plus waist
$97,000
UnitreeH2 standard
- Standing height
- 1820 mm in parameter table; confirm drawing
- Weight including battery
- About 70 kg
- Total joints
- 31
Price on request
UnitreeR1 EDU
- Standing dimensions
- 1230 × 357 × 190 mm
- Weight including battery
- About 29 kg
- Total motorized joints
- 26–40 depending on options
Price on request
UnitreeR1 AIR
- Standing dimensions
- 1230 × 357 × 190 mm
- Weight including battery
- About 27 kg
- Total motorized joints
- 20
Price on request
UnitreeH2 Plus
- Standing dimensions
- 1820 × 456 × 218 mm
- Weight with battery
- Approximately 70 kg
- Body DOF
- 31 motorized body joints, excluding optional hands
Price on request
Quadrupeds
UnitreeGo2 EDU
- Weight (with battery)
- About 15 kg
- Nominal payload
- About 8 kg
- Development access
- Secondary development supported on EDU; confirm low-level access and software version in the quotation
Price on request
UnitreeB2 (legged)
- Weight (with battery)
- About 60 kg
- Ingress protection
- IP67
- Walking load
- Over 40 kg
Price on request
UnitreeGo2-W
- Weight (with battery)
- About 18 kg
- Nominal payload
- About 8 kg; maximum approximately 12 kg
- Speed
- 0–2.5 m/s
Price on request
UnitreeB2-W
- Weight (with battery)
- About 85 kg
- Ingress protection
- IP67
- Walking load
- Over 40 kg
Price on request
UnitreeAs2 (AIR / PRO / X / EDU)
- Configurations
- AIR, PRO, X and EDU
- Weight with battery
- Approximately 20 kg
- Motorized joints
- 12
Price on request
UnitreeAs2-W (X / EDU)
- Configurations
- As2-W X and As2-W EDU
- Weight with battery
- Approximately 25 kg
- Motorized joints
- 16
Price on request
UnitreeGo2 X
- Edition
- Go2 X
- Weight with battery
- Approximately 15 kg
- Standing dimensions
- 700 × 310 × 400 mm
Price on request
Robotic Arms
UnitreeD1 (single arm)
- Arm axes
- 6; plus one separate gripper axis
- Payload
- 500 g
- Arm reach
- 550 mm excluding gripper; 670 mm including gripper
Price on request
Company milestones
- 2026-08-19A-share trading began on the Shanghai Stock Exchange STAR Market under code 688836. [Shanghai Stock Exchange listing announcement]
Company references
Company websites and published references for further review.
Considering this supplier?
Tell us which product from Unitree Robotics you are considering and what it needs to do. We can review availability, documentation, and the next sourcing steps for your request.